About the role
1. Key Mission:
- Build an engineering organization capable of developing hybrid inverter and BESS products that are safe, reliable, cost competitive, highly efficient, easy to install and service, IoT/cloud connected, scalable from residential to C&I applications, designed for Indian grid and operating conditions, and ready for domestic and international markets.
- Primary objective: Build core power-electronics IP rather than remaining dependent on OEM products.
2. Key Responsibilities:
- A. Product Architecture:
- Own architecture for hybrid inverter, on-grid inverter, off-grid inverter, battery inverter, PCS, residential BESS, C&I BESS, battery packs, BMS, EMS, energy gateway, and monitoring platform.
- Define PV -> Inverter -> Battery -> Grid -> Load -> EV system architecture.
- B. Hybrid Inverter Development:
- Lead development of 3 kW, 5 kW, 6 kW, 8 kW, 10 kW, 15 kW+, and three-phase hybrid inverter platforms.
- Key engineering areas: MPPT, DC/DC, DC/AC conversion, power semiconductor selection, MOSFET/IGBT/SiC architecture, magnetics, gate drivers, protection circuits, grid synchronization, anti-islanding, power-factor control, harmonic reduction, thermal management, surge protection, and firmware/control algorithms.
3. BESS Engineering:
- Develop scalable BESS platforms from residential to commercial applications.
- Responsibilities include battery pack architecture, rack design, BMS, cell selection, battery balancing, SOC/SOH algorithms, thermal management, DC protection, contactors, fuses, pre-charge circuits, PCS, EMS, fire protection, HVAC integration, containerized BESS architecture, battery monitoring, and remote diagnostics.
- Experience with LFP chemistry and large-format battery systems is highly desirable.
4. BMS & EMS Development:
- Build or manage development of an intelligent BMS capable of cell monitoring, cell balancing, over-voltage protection, under-voltage protection, over-current protection, short-circuit protection, temperature protection, SOC calculation, SOH calculation, fault detection, event logging, and remote diagnostics.
- Develop EMS capabilities for solar self-consumption, peak shaving, time-of-use optimization, backup power, grid charging, solar charging, battery scheduling, demand management, DG optimization, and dynamic energy management.
5. Software & Connectivity:
- The inverter/BESS should become a connected energy platform, not merely hardware.
- Lead integration of embedded firmware, DSP, MCU, CAN, RS485, Modbus, Wi-Fi, 4G, Bluetooth, OTA firmware updates, cloud monitoring, mobile application, remote diagnostics, and API integration.
- Target architecture: Device -> Gateway -> Cloud -> App -> Analytics -> AI.
6. Product Development Process:
- Own the complete NPD process: Market requirement -> Product specification -> Architecture -> Simulation -> Prototype -> EVT -> DVT -> PVT -> Certification -> Mass production -> Field validation.
- Establish engineering gates for design review, BOM review, reliability review, safety review, software validation, hardware validation, production validation, and field testing.
7. Testing & Reliability:
- Build an internal validation laboratory covering electrical, efficiency, MPPT performance, power factor, THD, load testing, grid simulation, battery cycling, environmental testing, high temperature, low temperature, humidity, dust, water ingress, vibration, shock, altitude, safety, short circuit, over-voltage, over-current, thermal runaway, insulation, ground fault, surge, and lightning protection.
- The engineering head will be accountable for field failure rate and product reliability.
8. Certification & Compliance:
- Lead product certification and compliance for relevant Indian and international standards, including applicable BIS, IEC, IS standards, EMC, grid-connectivity requirements, battery safety requirements, transportation requirements, and fire-safety requirements.
- Experience with certification laboratories and regulatory authorities is strongly preferred.
9. Manufacturing Transfer:
- Work closely with manufacturing, quality, supply chain, procurement, NPD, and service to achieve design -> prototype -> pilot -> mass production.
- Responsibilities include DFM/DFA, BOM optimization, component localization, test fixtures, end-of-line testing, production calibration, yield improvement, and cost reduction.
10. Cost Engineering:
- Build products that can compete with Chinese and Indian manufacturers.
- Own target cost -> design cost -> BOM cost -> manufacturing cost -> gross margin.
- Focus on component localization, BOM reduction, design simplification, common platforms, supplier development, power density, and manufacturing yield.
11. Engineering Team to Build:
- Head - Power Electronics: 1
- Power Electronics Engineers: 4-6
- Embedded/Firmware Engineers: 4-6
- BMS Engineers: 3-4
- EMS/Software Engineers: 3-4
- Hardware Engineers: 3-5
- Mechanical/Thermal Engineers: 2-3
- Battery Pack Engineers: 2-3
- System Engineers: 2-3
- Testing & Validation: 5-7
- Certification/Compliance: 2
- Reliability Engineers: 2
- NPD/Project Managers: 2-3
- Initial team: ~35-50
- The organization can subsequently scale to 75-100+ engineers as multiple product platforms are developed.
12. First 12-Month Deliverables:
- 0-90 Days:
- Build engineering organization
- Finalize product roadmap
- Select technology architecture
- Identify OEM/technology partners where required
- Establish laboratory requirements
- Freeze first-product specifications
- Create engineering SOP/NPD process
- 3-6 Months:
- Working hybrid inverter prototype
- Battery pack prototype
- BMS prototype
- EMS prototype
- Cloud monitoring prototype
- Initial laboratory validation
- 6-9 Months:
- Engineering validation
- Field trials
- Certification
- Manufacturing prototype
- Reliability testing
- 9-12 Months:
- Mass-production-ready hybrid inverter + BESS platform with certification, production BOM, manufacturing test system, service manual, installation SOP, warranty framework, remote monitoring, and field-service architecture
13. Key KPIs:
- Product development cycle: <= 9-12 months
- Prototype success rate: >90%
- First-pass certification: >90%
- Product efficiency: Industry competitive
- Field failure rate: <1%
- Engineering change after launch: <5%
- BOM cost reduction: 10-20% annually
- Localization: >70% initially, increasing
- On-time NPD: >90%
- Warranty cost: <1-2% of sales
- Product gross margin: Company target
- New products launched: 3-5/year
14. Candidate Profile:
- Must Have:
- 12+ years in power electronics
- Strong inverter experience
- Hybrid inverter/PCS experience
- BESS experience
- BMS understanding
- Embedded systems experience
- Product development experience
- Manufacturing-transfer experience
- Certification experience
- Team-building experience
- Preferred:
- Experience with companies/products involving solar inverter, hybrid inverter, PCS, BESS, lithium battery, EV power electronics, energy storage, EMS, and microgrid.
- Experience working with Indian and Chinese engineering/manufacturing ecosystems would be a major advantage.
15. Leadership Expectations:
- This is not a conventional R&D manager role.
- The person must be able to think like a CTO + engineer + product manager + manufacturing leader.
- They must be comfortable moving between customer -> product -> circuit -> firmware -> prototype -> factory -> certification -> field and personally solve critical engineering problems.
- Look for senior engineers/leaders from companies involved in solar inverters, BESS, power electronics, EV chargers, UPS, industrial drives, energy storage, and EV powertrain.
- Potential talent pools include organizations such as Sungrow, Huawei Digital Power, Delta Electronics, Schneider Electric, ABB, Siemens, Luminous, Su-Kam, Exide Energy, Amara Raja, Waaree, Enphase, Growatt, and GoodWe, among others.